
Dry rot and wood rot repair, fixed at the source, for homeowners across Clark County

Rot Busters is a family-owned, licensed dry rot and wood rot repair specialist in Vancouver, WA. We started because we kept running into rot on nearly every PNW home we worked on, and few contractors treated it as more than an afterthought. So we made it our specialty.
Led by owner Denis Gavrilov, with Yaro Ersh handling estimating and sales, our team brings 14 years of combined construction experience, including three years at a dedicated Seattle-area rot repair company.
Every job starts with the same question: where is the water getting in? We fix that first, then rebuild the damage so it stays fixed.

Soft trim, fascia and window frames rebuilt after we find and stop the water feeding the rot.
Learn More
Cedar, Hardie, T1-11 and LP SmartSide repaired, with the damage behind it fixed and flashed.
Learn More
Rotted joists, ledgers, posts and balcony decks rebuilt solid and sealed against PNW rain.
Learn More
Rotted studs, rim joists, subfloors and beams safely shored and rebuilt to carry their load.
Learn More
We trace the leak behind the rot, from missing kickout flashing to failed window seals.
Learn More
We open up the problem area and measure how far the rot really goes before we quote.
Learn MoreSoft wood, dark stains or peeling paint? We'll find where the water's getting in and give you a fixed price before any work starts.

Most rot gets patched by people who don't understand why wood rots. The fix looks fine for a season, then the soft spots come back. We work differently.
Rot repair is our specialty, not a side job for a handyman or GC.
We trace how water gets in and correct it, so the same spot stops rotting.
James Hardie siding, Simpson Strong-Tie hardware, Sika and OSI sealants.
We open up the area first, then give you an itemized, fixed-price quote before work starts.
Every install is backed, so you know the work was done right.
Rot is rarely covered by insurance, so we offer financing through our payment portal.
Rot is almost never covered by homeowners insurance, so the bill usually lands on you. We offer financing through our payment portal so you can fix it now and pay over time.
If you're in or near any of these communities, our rot repair crew can help.
Dry rot is wood decay caused by a fungus, and despite the name, it needs moisture to grow. The fungus feeds on damp wood and breaks it down from the inside until it turns soft, dark, and crumbly. Vancouver, WA sees rain much of the year, so the wet, poorly ventilated conditions rot needs are easy to come by here.
It rarely stays in one spot. From a wet window sill, it travels into the framing, then along the studs and joists behind your walls. T1-11 and LP SmartSide siding are especially exposed, since they soak up water once it gets behind them. Cedar holds up better but cracks with age, letting water slip behind the board. One soft board can quietly become a whole wall.
Most homeowners find rot late, after it has already reached the structure. Catching it early keeps the repair small. Watch for:
Spot even one and it is worth a closer look. Rot only grows, and a two-day fix can turn into a structural rebuild if it sits through another rainy season.
Water follows the same weak points on most PNW homes, so a handful of repairs come up again and again:
Not every rotted board needs to come out. A big part of an honest repair is knowing when wood can be saved and when it has to go. Here is how we decide:
We open up the area and check how far the damage really goes before quoting, since the soft spot you see is often smaller than the rot you do not. From there, we replace rotted wood only where it is truly gone and leave the solid wood alone.
For a tiny, isolated soft spot, a filler or epoxy patch can buy you time. But most DIY dry rot repair treats the symptom, not the cause. Wood filler over a leaking window does not stop the water, so the rot keeps going behind the patch.
It is worth calling a specialist when:
Swapping the board is the easy part. The part that actually keeps rot from returning is tracking down the moisture source and sealing it off, which is where specialist experience earns its keep.
Rot is almost never covered by insurance. Insurers treat it as a maintenance issue, so the bill lands on you, which makes the quality of the repair matter even more. A handyman who paints over soft wood or swaps one board without finding the leak has not fixed anything. The water is still getting in, and the rot picks right back up.
We work the other way around. We find the water source first, correct it, then rebuild, so you are not paying for the same repair twice. Left alone, rot keeps spreading into sound framing and chips away at both the safety and the resale value of the house, which is why catching it early almost always costs less than waiting.
It can be. Surface rot is cosmetic, but once it reaches joists, beams, or load-bearing framing, it weakens the structure that holds your home up. That is why we check how far the damage goes before we quote, so you know whether it is a minor fix or a safety issue.
Rot comes back when the water source is left unaddressed, so prevention starts there. We correct the leak and flashing as part of our repairs, and we recommend keeping caulk joints sealed, gutters clear, and paint intact so water keeps shedding off the wood.
Usually not. Insurance covers sudden, accidental damage, but rot is treated as a slow-building maintenance problem, so most repairs come out of pocket. Catching it early pays off: a small, contained repair costs far less than a structural job once the rot has spread.
Yes. Because rot repair is rarely covered by insurance, we offer financing through our payment portal so you can move forward without paying the full cost upfront. Ask about options when you request your quote.
Rot does not pause or heal on its own. Left alone, the fungus keeps eating into healthy framing, and the damp invites mold and even termites. Over time it can weaken floors, walls, and beams to the point of a safety risk. Waiting almost always turns a modest repair into a much larger one.
It depends on how far the rot has spread. Window and trim repairs usually take one to two days, siding repairs one to three, framing and structural repairs two to four, and waterproof decks five to seven. After we assess the damage, we give you a clear timeline with the quote.
Every job is quoted as a fixed price based on site conditions and the size of the affected area, so you know the number before work starts. Structural repairs generally start around $2,500, and siding is priced per square foot with the rot quoted separately. We give you an itemized quote after the assessment.
We focus on residential rot repair, serving homeowners across Clark County. Our specialty is houses, from single-story homes to multi-level properties, so your repair gets a crew that works on homes every day.
We do not run 24/7, but we do take emergency callouts for active leaks or structural damage. If water is getting in right now, call us and we will prioritize getting out to you.
We serve homeowners across all of Clark County, WA, including Vancouver, Camas, Washougal, Battle Ground, Brush Prairie, Hockinson, Orchards, Felida, Ridgefield, and Proebstel. If you are nearby but do not see your town listed, reach out and ask.
Yes. Every job comes with a one-year workmanship guarantee. It covers the quality of our installation, so you can feel confident the repair was done right. Standing behind our work is part of how we do business.
Have rot, or think you might? Send us a few details and we'll be in touch to set up a look. For active leaks or urgent structural concerns, call us and ask about an emergency callout.
Have rot, or think you might? Send us a few details and we will get right back to you. For active leaks or urgent structural concerns, call us and ask about an emergency callout.